VESC-Project.com is online! Public VESC-tool download5 days, 13 hours ago | 0 Replies
Hi Builders, we are proud to announce that from now on, the website www.vesc-project.com 1.4K online! It will take a long time to get to this point, but we think it will be worth the time. The project is now built on a solid foundation to ease the burden in the future.
What can you expect? You can access vesC-Tool downloads and forums, and other sections will follow soon. In addition to this week’s good start, you can also use the new FW 3.27 with 4.xx hardware. Your 4.xx will still be 4.xx, but FOC is much better, and all the new features, such as input wizard and throttle curve, are available. Please note that this update does not make the DRV for HW 4.x damage to some motors more powerful, so it may be retained if you have problems with the motor and HW 4.x before.
Vesc-tool is available in several versions. They are all exactly the same except for one small detail: if you choose to contribute financially to the development of the project, you will receive a status based on your donation. A nice logo and special thanks will always remind you of your determination to support the project. Status versions of VESC® Tool can be upgraded for up to 6 months without losing status badges.
Users of the Original hardware can download VESC® Tool Original and enter the access code that will be provided when purchasing the hardware.
Hardware users who do not have boot loaders installed will benefit from using VESC-Tool. Benjamin added a boot loader upload TAB, which can be found under the firmware section. This allows you to use the new firmware without having to install the boot loader through the ST-Link programmer. Your USB connection can get the job done!
When you upload the new firmware to hw4.xx for the first time, you must select the correct hardware version from VESC Tool, because the old firmware does not tell VESC Tool which hardware version it is. After the first update, hardware is automatically selected.
Visit the forum on the VESC-Project website and read about sticky threads in the beta section – specifically this one: HTTP: //www.vesc-project.com/node/82 545 Third party hardware and software, such as Bluetooth modules and applications, can only be used after resellers confirm safe use and in conjunction with new firmware! Check before you use!